BAND SEALER

How a continuous band sealer works

A continuous band sealer carries a filled pouch through a heated sealing path. The open edge must be presented to the machine in a position that lets compatible heat-sealable layers meet evenly.

1. Place the filled pouch on the belt conveyor with its open edge aligned to the sealing path.
2. The conveyor moves the pouch through the configured sealing zone.
3. Roller heaters apply heat along the pouch edge to join compatible layers.
4. Set the available controls for the pouch and product, then inspect sample seals before routine production.

Main components and their functions

• Belt conveyor: supports and moves the pouch through the sealing path.
• Three-phase motor: provides the drive; the current page does not publish its power rating.
• Roller heater: applies heat at the pouch edge; its exact rating and operating range are not published.
• Electronic controls and digital display: the current page lists conveyor-speed, heating-temperature and fan-speed controls.
• Mild-steel structure: supports the listed assembly; the page does not specify its finish or grade.

Pouch compatibility and process selection

Suitability depends on the pouch's heat-sealable layer and laminate structure, thickness, dimensions, filled weight, product residue near the seal and required output. A sample pouch and product details help assess the application. Do not assume one setting or film type suits every pack.

Information to share for a quotation

• Pouch material or laminate construction and thickness, if known.
• Pouch dimensions, filled weight, seal location and required seal width.
• Product type and whether powder, liquid or residue could reach the seal area.
• Expected pouches per minute and how pouches are presented to the machine.
• Available electrical supply, line layout, and any coding or downstream equipment requirement.

Band sealer FAQs

What does a continuous band sealer do?

It transports a filled pouch and applies heat along its open edge to close compatible heat-sealable material. Check compatibility and settings with the actual pouch.

Which pouches can it seal?

The pouch must have layers that can form a seal under the machine's process. Share the laminate specification and a representative pouch for review; universal film compatibility is not claimed.

How are the settings selected?

The current page lists conveyor speed, heating temperature and fan speed as controls. Suitable settings depend on the pouch and product and should be checked with sample packs.

Why does band-sealer performance vary between pouches?

Laminate structure, pouch condition, heat setting, conveyor speed, filled weight and material near the seal can affect seal formation. A representative pouch and product details help assess suitability and settings.

Is conveyor speed the only production-rate factor?

No. Pouch presentation, operator loading, laminate response, seal length and downstream handling can also affect practical output.

What machine details are published?

The current page lists a three-phase motor, electronic controls, belt conveyor, roller heater, mild-steel structure and digital display. It does not state motor power, temperature range, pouch limits, rated output or seal-strength values.

What should I send for a quotation?

Share the pouch material and dimensions, filled weight, sealing requirement, target output, representative samples, available power and line-layout details.

Does Thermocare accept enquiries from across India and overseas?

Thermocare is based in Kanpur, Uttar Pradesh, and accepts enquiries from across India and for export projects. Scope, configuration and delivery are reviewed for each enquiry.

Discuss your band-sealing requirement: Share the pouch or laminate material, pouch dimensions, product weight and expected production requirement. A sample pouch can help with selection and trials. Contact Thermocare, call +91 79916 56592 or +91 96705 15151, or WhatsApp either number: +91 79916 56592 / +91 96705 15151.