Product Description
A screening/separator machine separates bulk material into size-based fractions using selected screen openings. The suitable setup depends on the feed condition, target particle-size ranges, number of fractions, required rate and discharge arrangement.
Screening primarily separates by size; it does not by itself remove contaminants that share the same size. Magnetic, density-based or colour-based separation may require another process or an additional separator. Share a sample and separation objective for a configuration review.
Product Details
- M.S. Body
- 2 HP 1440 RPM Motor with 3 Inch Gearbox.
- With Electronic Control Panel
How a screening separator works
A screening separator sorts material by size using selected screen openings. The exact movement, number of decks and outlet arrangement depend on the supplied configuration; the current page does not specify those details.
- Define the feed material, particle-size range, moisture and fractions required.
- Feed material at the agreed rate using the supplied inlet arrangement.
- The configured machine movement presents the material across the selected screen surface; confirm the exact drive and motion for the model.
- Particles divide according to the screen opening and deck/outlet arrangement selected for the job.
- Collect each fraction through the configured outlets and check a representative sample against the required separation.
Main assemblies and construction
- Machine body: the current product details list an M.S. body. Confirm exact grade, finish and product-contact surfaces for the application.
- Screen surface: screen type, aperture, area and number of decks are not listed. Select these against the feed and required fractions.
- Motor and gearbox: the page lists a 2 HP, 1440 RPM motor with a 3-inch gearbox. Confirm the selected configuration and drive arrangement in the technical offer.
- Control panel: an electronic control panel is listed; confirm its included functions and electrical requirements.
- Feed, discharge and access: inlet/outlet layout, covers and cleaning access are not detailed on the page; confirm them against the approved drawing.
Frequently Asked Questions
What is the difference between screening and cleaning?
Screening separates primarily by size. Removing contaminants with similar size, or separation by magnetism, density or colour, may require an additional process or separator.
Can one screen produce several grades?
Only when the configured deck and outlet arrangement provides the required number of separations. Confirm the available arrangement for the selected model.
What specifications are listed for this machine?
The page lists an M.S. body, a 2 HP 1440 RPM motor with a 3-inch gearbox, and an electronic control panel. Capacity, screen aperture and number of decks are not listed; confirm them for the material and required separation.
What details help select a screening separator?
Share the material, particle-size range, feed rate, number of required fractions, moisture or other material behaviour, available space and a sample if possible.
Discuss your screening or separator requirement: Share the product, particle-size range, feed rate, number of required fractions, moisture or other relevant material behaviour, and a sample if available. This helps clarify the separation objective and suitable configuration. Contact Thermocare, call +91 79916 56592 or +91 96705 15151, or WhatsApp either number: +91 79916 56592 / +91 96705 15151.