CARTON STRETCH WRAPPING

How carton stretch wrapping works

The published description says a stretch-film roll is fitted to the machine, the carton is placed on a round plate and the machine wraps film over the carton. The exact wrapping path and pneumatic-bar functions depend on the supplied model and should be confirmed in its operating instructions.

1. Confirm carton dimensions and weight, film specification, required wrap and packing rate.
2. Fit and thread the specified film roll according to the supplied operating procedure.
3. Place the carton on the machine's round plate using the approved loading method.
4. Use the electronic control panel for the listed start/stop and packing-speed adjustments.
5. Run the configured cycle to apply stretch film over the carton; confirm the wrapping path and settings for the selected model.
6. The page mentions pneumatic-bar controls but not their exact function; operate them only as documented for the supplied machine.

Main assemblies and construction

• Body/frame: the product details list an M.S. body. Confirm exact grade and finish in the approved drawing.
• Round plate: the description identifies this as the carton placement surface. Plate diameter and load limit are not listed and need confirmation.
• Motor and gearbox: the page lists a 5 HP, 1440 RPM motor and a gearbox. Confirm the selected drive and duty in the technical offer.
• Electronic control panel: listed controls include on/off operation and packing-speed adjustment. The available speed range and cycle functions are not specified.
• Film-roll and pneumatic-bar arrangements: the description mentions a fitted film roll and pneumatic bars. Film tension/cut details, bar purpose and any required pneumatic utilities must be confirmed; they are not specified on this page.

Information for a configuration review

Share minimum/maximum carton dimensions and weight, carton stability, stretch-film material/width/thickness and roll details, wraps or containment required, cartons per hour, loading method, available power, any required pneumatic utility, line direction and floor space.

Frequently Asked Questions

What does a carton stretch wrapping machine do?

It applies stretch film around cartons. The product description says the film roll is fitted to the machine, the carton sits on a round plate and the machine wraps film over it.

How does the wrapping process work?

Fit the specified film roll, position the carton on the round plate and use the listed controls to operate the configured wrapping cycle. Confirm threading, speed settings and pneumatic-bar operation from the supplied instructions.

Can it wrap every carton or package?

No single setup should be assumed to suit every carton. Confirm the carton dimensions and weight, load stability, film specification and required packing cycle before selecting a configuration.

What specifications are listed?

The current product details list an M.S. body, 5 HP 1440 RPM motor, gearbox and electronic control panel. The description also mentions a round plate and pneumatic bars. Load limits, film dimensions and exact bar functions are not specified.

What information should I share for a selection review?

Share carton dimensions and weight, film type and roll details, required packing rate, available space, site power and whether the machine must connect to an existing line. Confirm any pneumatic utility requirement with the proposed configuration.

Do you accept enquiries outside Kanpur?

Thermocare is based in Kanpur and accepts enquiries from across India and for export. Project scope, destination requirements and logistics are reviewed for each enquiry.

Discuss your carton-wrapping requirement: Contact Thermocare, WhatsApp +91 79916 56592 or +91 96705 15151, or call +91 79916 56592 or +91 96705 15151.